Taconic
RF-35TC High Frequency PCB Board 20mil 30mil Thickness
Hello
Everyone,
Today,
we introduce a type of high frequency PCB built on RF-35TC.
RF-35TC
is a PTFE based, ceramic filled fiberglass high frequency material from Taconic
company.
The
specifications of PCB are as follows
Double
sided, substrate is RF-35TC, DK at 3.5; 105mm long by 87mm wide; finished PCB
thickness at 1.6mm, finished copper weight at 2oz; No solder mask and
silkscreen; surface finish is Immersion gold
This
is the stack up drawing.
Top
layer and bottom layer are 2oz finished copper, dielectric material RF-35TC is
in the middle at 1.524mm thick, DK at 3.5
The
basic colour of RF-35TC PCB is brown and grey. Its main applications are power
amplifiers, couplers and filters. In addition, It’s also widely used in
antennas, satellite equipment and so on.
PCB Capability
|
|
PCB Material:
|
PTFE based
ceramic filled fiberglass substrate
|
|
Designator:
|
RF-35TC
|
|
Dielectric
constant @ 10GHz:
|
3.50
|
|
|
Layer count:
|
2 Layer,
Multilayer, Hybrid type
|
|
Copper weight:
|
0.5oz, 1oz, 2oz
|
|
PCB thickness:
|
0.3mm, 0.6mm,
0.8mm, 1.6mm
|
|
(10mil, 20mil,
30mil, 60mil substrate)
|
|
Solder mask:
|
Green, Red,
Black, White, Blue etc.
|
|
PCB size:
|
≤400mm X 500mm
|
|
Surface finish:
|
Bare copper,
HASL, ENIG, Immersion tin etc.
|
|
|
|
|
We
can provide you with double sided board, multilayer board and hybrid board.
Thickness ranges from 0.3mm to 1.6mm, maximum size at 400 mm by 500mm; there’re
surface finishes of bare copper, hot air level, immersion gold etc.
RF-35TC
offers superior heat dissipation performance, so it's a type of thermally
conductive low loss laminate. It's best suited for high power applications.
Heat dissipates away from both transmission line on PCB and surface mount
components such as capacitor etc.
Should
you have any questions, please feel free to contact us.
Thank
you for reading.
Appendix
Data
sheet of RF-35TC high frequency circuit material