4 Layer Hybrid PCB Built On 8mil
0.203mm RO4003C and FR-4 for Phased Array Antennas
are custom-made products, the picture and parameters shown are just for
we’ll see a type of 4 layer hybrid PCB built on 0.203mm (8mil) RO4003C and FR-4
for the application of attenuator. It's 1.1 mm thick with blue solder mask and
immersion silver on pads. They're fabricated per IPC 6012 Class 2 using
supplied Gerber data. Each 25 boards are packed for shipment.
see the stack-up.
1 to layer 2 is the RO4003C core, then the left are FR-4 material. Boards are
see the micro-section.
Features and Benefits
RO4003C exhibit a stable dielectric constant over a broad frequency range. This
makes it an ideal substrate for broadband applications.
Signal integrity performance improvement over the stack-ups with all FR4 board
Thermal stress test, reliability test, insulation resistance test and ionic
contamination test, AOI test etc.
Experienced sales persons provide skilled customer services.
transceiver Power divider LNB Attenuator Directional
Parameter and Data Sheet
Our Driving Circuit Boards
vias, Buried vias
Copper Boards 12oz
Tg, High CTI Material
FR-4 and High Frequency Material
Class 2, IPC Class 3
Free PCB (RoHS Compliant)
PCBs to 32+ copper layers boards
Core PCB (MCPCB)
Materials – FR-4, Polyimide, Rogers & More
Compliant PCB Manufacturer
PCB / High Frequency PCB
BGA, Gold Finger, Edge dome
(2016), ISO14001 (2015), ISO9000 (2015), UL certified
on Prototypes, Small Batches, Volume Production
turn-around, double sided PCB 24 hours available.
to door shipment service